Filter
Top Products
5
PLEASE NOTE
PLEASE NOTE
1.1
GENERAL INFORMATION
Normal use
Copyright
Technical status
Liability
SAFE WORKING
Danger
Cauntion
Note
Attention
0The RMS is supplied in flawless condition in terms of safety.
LINDY can only guarantee the safety, reliability and performance
of the device if:
• modifications, conversions or repairs are carried out only by persons
authorised by the manufacturer,
• the electrical installation of the installation room conforms with the
general requirements according to IEC,
• the device is operated in an office environment (class 3K2 according
to EN 60721). More stringent requirements apply to rooms with a hig-
her degree of pollution.
• the device is operated at a maximum ambient temperature of +35°C.
All rights to this manual are held by LINDY. The reproduction
and reprinting even of parts of this Manual are permitted only if
the source is stated.
Technical status 07/2004
LINDY reserves the right, without prior notice,
– to make changes to the design and components and, instead of the
stated components, to use equivalent other components in the pursuit
of technical progress,
– to change the performance features of the software,
– to change the information in this manual.
LINDY accepts no liability for the complete correctness of the
information. In particular, no liability whatsoever is accepted for
damage or injury caused as a result of the use of the device.
Important passages which must be observed are highlighted as
follows in these instructions:
Calls attention to safety measures to prevent personal injury.
Highlights what must be done or not done in order not to damage
material assets.
Recommends actions and provides tips for trouble-free operation.
The RMS LITE will be delivered without display and front console.
1
Monitoring System
Rack Monitoring System
RMS
LITE