Filter
Top Products
- 16 -
5. Remove the gripper, by grasping the bobbin pin in the centre and
pulling the gripper out.
Notice
The gripper cannot be dismantled when the needle is lowered.
Cleaning the bobbin case carrier with the gripper track
1. Using the brush
J
remove all accumulated fluff and remnants of
thread from the retainer ring
u
, from the gripper, the gripper dog
and the bobbin case carrier with the gripper track.
2. A lint-free cloth moistened with precision mechanic oil or sewing
machine oil is used to clean the gripper track from fluff.
3. Clean the dismantled gripper in the same way.
4. Reassemble the parts by reinserting the gripper and the retainer
u
in the bobbin capsule carrier and then turning the catches
i
to their
original position so that they keep the retainer
u
in place.
Cleaning the carrier of the feed dog on the stitch plate
1. Remove the stitch plate
a
, using the stitch plate opener
H
to screw
out the mounting screws.
2. Clean the catch teeth of the feed dog and the outside of the bobbin
case carrier with the brush
J
.
Storage
• Remove the power plug
k
from the wall socket if you are not using
the sewing machine.
• Place the protective cover
L
over the sewing machine to protect it
from dust.
• Store the sewing machine in a dry location.
Technical data
Power supply: 220–230V
~
50Hz
Power consumption: 85W (Lamp: 15W, Motor: 70W)
Light bulb: E14, 15W
Protection class: II
Disposal
Do not dispose of the appliance in your normal domestic
waste. This product is subject to the European guideline
2002/96/EC.
Dispose of the appliance through an approved disposal centre or at your
community waste facility.
Observe the currently applicable regulations.
In case of doubt, please contact your waste disposal centre.
Dispose of all packaging materials in an
environmentally friendly manner.
Warranty & Service
The warranty for this appliance is for 3 years from the date of purchase.
The appliance has been manufactured with care and meticulously exami-
ned before delivery. Please retain your receipt as proof of purchase.
In the case of a warranty claim, please make contact by telephone with
our service department. Only in this way can a post-free despatch for your
goods be assured.
The warranty covers only claims for material and manufacturing defects,
not for wearing parts or for damage to fragile components. This product
is for private use only and is not intended for commercial use.
The warranty is void in the case of abusive and improper handling, use of
force and internal tampering not carried out by our authorized service
branch. Your statutory rights are not restricted in any way by this warranty.
DES Ltd
Units 14–15
Bilston Industrial Estate
Oxford Street
Bilston
WV14 7EG
Tel.: 0870 787 6177
Fax: 0870 787 6168
e-mail: support.uk
@
kompernass.com
Kompernass Service Ireland
c/o Irish Connection
41 Harbour view
Howth Co. Dublin
Tel: 087-99 62 077
Fax: 18398056
e-mail: support.ie
@
kompernass.com
Importer
KOMPERNASS GMBH
BURGSTRASSE 21
D-44867 BOCHUM
www.kompernass.com
IB_KH4001_E2719_GB_LB4 23.04.2008 9:28 Uhr Seite 16