Filter
Top Products
Q Select the pcsition that wiflplace the silt supports
near the outermost point on sill(FIG. 10).
Attach the:sitlsupports tothe cabinet track hole
ctosest to the selected position using screw (ITEM E).
O Place the s}i! supports with the cabinet on;the
window sill's selected position.
[]The cabinet should be inSt_lted with a very
slight tilt (about 1!4") downward toward the outside
(FIG. tl).
Adjust the bolts end the nuts of s_llsupports to leve_
the cabinet.
_TEMB F_G, 11
W Attach _ cabinet tothe inner sill by driving the
screws (ITEM F) through the Lower Guide i_o the
window inner sili (FIG. 12).
f _ _-_ kow0rGuide
_TEMB FIG. 12
_Pull each sidecurtainfully to each sideof
window opening,
Attach eachside curtaintothe windowsash using
screws (ITEM G). (FIG. 13)
_ Attach the L BRACKET (ITEM J) with screw
(iTEM G). (F_G. _4)
FiG. 14
_ DRAINAGE
Be sure to Insert the drain pipe into base pan before
Instatlat_on.
The air conditfoner must be installed with a slightUtt
(_/4 ") downward to the outside for proper drainage of
excess condensed water t-}rough the drain pipe.
(FtG,is)
D'N_ -BASEPA'"EA" ]
_OTTOM F'G'" 1
_ Slide the chassis into the cabinet.
(F}G.
1
6)
CAUTION: For security purposes, reinstall side
screws you removed In step 1.
l
RG, 16
a_Out the:foam strip {ITEM H) to the proper length
insert between t_ upper window sash and the
lower window sash. (FIG. 17}
FIG. 17
_oThe vent control handle must be
straightened
re the decoretive front is attached.
Puli out part _ to align with part _3.
FiG. 1B
-7-