Filter
Top Products
INSTALLATION
Pick a location wh_h wi_lallow you to blow the cold
air into the area you want, Windows used for
installation must be strong enough to support the
weight of the air conditioner_ Gcod installation with
special attention to the proper position of the unit
wilt tessen the chance that service wi_tbe needed,
When cooling more than one room, instalta_on
location is very important. To coo! your morns, cold
sir must be blown from the sir conditioner in a
straight path.
HOW TO INSTALL
if the air conditioner is blacked by a storm
window frame, see step 19 o_npage 8 befo_e
bsglnnlng to install
_]1 Flemove the screws which fasten the cabinet at
both sides and at the back. Save side screws.
Discard b_ck screws.
p S_ide the unit out of the _abit'rat by gdpping the
ass pan handle and pull forward while bracing the
cabinet.
FiG. 4
_Cut the FOAM SEAL {iTEM 1)to fit the
underside of the window st,sh, Pee_off the backing
and attach the FOAM SEAL as shown in Fig. 5.
FIG, 5
D insert the side curtain {ITEM A) into the upper
guide and towsr guide of the aircond_oner, Fasten
the curtains to the unit w_h screws (tTEM E},
ITEM5" RG. 6
_Open the window. Mark a line on cen_er of the
window inner sill,
Carefuliy place the cabinet on the window tuner sill
and align the center of cabinet front with the center
line marked in the window inner sill,
D PulI the bottom window sash down behin_ the
upper g_ide until they meet.
NOTE: Do not pull the window sash down so tightly
that the movement of side curla_nis restricted=
F_G. 8
_ Loosely assemble the silt supports using the
parts in FIG, 9,
_TEMB
ITEMC
FIG. 9
-6-