Filter
Top Products
Bobbin Winding
....Note: ............................................................................................................................................
Set the speed control Iever at its fastest position for
(_ Upper thread guide
(_ Bobbin
_t Bobbin winder spindle
Guide the thread around the upper thread guide (flli_..
Insert the thread through the hole on the bobbin @,
threading from the inside to the outside. Put the
bobbin on the bobbin winder spindle _3_.
Push the bobbin winder spindle _3_to the right
4[_With the free end of the thread held in your hand,
depress the foot control. Stop the machine when
the bobbin has made a few turns, and cut the
thread close to the hole on the bobbin_
Depress the foot control again. When the bobbin is
fully wound, release the foot control and return the
bobbin to its original position by moving the spindle to
the left. Cut the thread as shown
Note:
For safety purposes, the machine witl stop automatically
2 minutes after the start of bobbin winding
f
f
%
,/-) ,._
f
%
%
j
14