Filter
Top Products
.
Hold the thread at both ends and tug gently to
ensure the thread is correctly inserted between
the tension discs. (If the presser foot lifter is
raised, the thread easily inserts between the
tension discs.)
(_ Right needle thread tension dial
4,5,6. After passing through the front cover thread
guide (1), pass the thread from the bottom of
the front cover thread guide (2) and the
up lever cover from right to left.
.
9.
7. Guide the thread over the front_6:_ _:_a
guide (3).
(_ Front cover thread guide (i
(_ Front cove[ _)_:_jd# .....
® .....
(_ Frontc v :_ead_uide(3) .....
Insert the slot of the needle
thread guide ....
Raise the needle to its highest point and pass the
thread through the needle bar thread guide from
left to right.
10. Thread the right needle from front to back and
putt the thread about 10 cm (4"t from the eye of
the needle to the back.
(_ Needle thread guide
(_ Needle bar thread guide
(_) Right needle
\
,4,5,6,7
,.8,
\
®
9, 10
£2_.__
/
@
38