Filter
Top Products
3. Hold the thread at both ends and tug gently to
ensure the thread is correctly inserted between
the tension discs. (If the presser foot lifter is
raised, the thread easily inserts between the
tension discs.)
(_ Lower looper thread tension dial
4. Hook the thread on the cornerQ_), and then pass
the thread through the looper thread guide.
Looper thread guide
3
\ J
5. Pass the thread through the lower looper
guide (1).
6. Pass the thread through the IoQ#!_i!i:!:iiii!ii_i!B!iii_!_!#!i_!i!ii!i_!ike-u
lever (lower).
7. Passthethreadthr_ughthdii_i!_i_i_!i_pert_ii:!!_ii_ii_ii_ii!ii_!i!_i!_i_i!_!_
guide (2).
J
through the hole on lower looper thread guide (4).
Hook the end of the thread on the threader.
Looper threader is optional.
If you don't have the looper threader, turn the
handwheel towards you until the lower looper
comes to its most left position.
Thread lower looper thread guide (4) from the left
side with a pair of tweezers. Then, turn the
handwheel towards you to move the lower looper
to the right position.
@ Lower looper thread guide (4)
(1) Lower looper thread
(2) Looper threader (optional)
28
@
"\\@
..
(1)f
/(2)
\9
J