Filter
Top Products
SECTION VI. BUTTONHOLE
Buttonhole
_1_Pattern selector:
(_2_Presser foot:
_3_Thread tension:
_4_Stitch length:
1 4 3 4
(BH)
Sliding buttonhole foot
1 to5
(0.25 to 1/
• To adjust buttonhole stitch density
Set the stitch length dial between 0.25 and 1.0 to aaoUSt
the buttonhole stitch density.
NOTE:Always check a buttonhole on a scrap of fabric to
make sure the adjustment satisfies you.
BH@ @ @_
_ ®
• Starting to sew
Snap the buttonhole foot (J) on the presser foot holder.
Carefully mark the buttonhole length on the fabric.
Place the fabric u qder the foot. with the buttonhole marking
running toward you
Move the slider (A) toward you, so that the red arrow (C) on
the slider aligns with the start mark (B). Lower the presser
foot.
NOTE:The markings on the slider are engraved in
centimeters.
13
Set the stitch selector at _. Sew forward until you reach the
front mark of your buttonhole. Stop sewing at a left stitch.
c _
B
54