Filter
Top Products
Changing Presser Foot
(_) Lever
_)Groove
®Pin
• To remove
Turn the handwheel toward you to raise the needle to its
highest position. Raise the presser foot.
Press the lever (_)on the back of the foot holder. The
presser foot will drop off.
• To attach
Place the presser foot so that the pin _on the foot lines
up directly below the groove _ of the foot holder.
Lower the foot holder to lock the foot in 01ace.
Presser Foot Types
• Zigzag foot
Use this foot for both straight and zigzag stitching.
For: Straight stitch (page 32)
Topstitching (page 34)
Basic zigzag (page 40_
Satin stitching (page 40_
Monogramming (page 42)
Applique (page 42)
Bar tacking (page 44)
Button sewing [page 44_
Overcasting stitch (page 46)
* Multiple zigzag stitch (page 46_
* Blind hem stitch (page 48_
* Lace work (,page 48_
* Shell stitch (page 50_
* Decorative stitch patterns (page 50_
Twin needle stitch [page 52_
(*Model 15408 exclusive)
• Sliding buttonhole foot
Use this foot for manual buttonhole making. It is marked
to help you measure a buttonhole accurately.
For: Buttonhole sewing (page 54)
• Zipper foot (Model 15408 exclusive)
The edge of the foot guides the zipper and keeps the
seam straight.
For:Zipper sewing (page 34)
• Straight stitch foot (Model 15408 exclusive)
Use this foot exclusively for straight stitching with the
center needle position.
For: Straight stitch (page 32)
Topstitching (page 34)
\
f
\
f
\
12
%
)
J
J