Filter
Top Products
Twin Needle Stitches (Option)
_1"_Stitch selector (for model 15212):
Stitch selector (for model 15616):
Stitch selector (for model 15218, 15718):
Y2_Presser foot:
,_3_Needle thread tension:
_4_Stitch length control:
_5_Stitch width control:
Y6_Needle:
3
3or9
3,9or 10
Zigzag foot
1 to4
0.5 to 1
1 to2.5
Twin needle
(optional item)
NOTE: Do not set the stitch width at more than 2.5,
otherwise the needle may hit the needle plate or presser
foot and could possibly break.
_1_Upper thread guide
_2_Check spring holder
_3_Thread take-up lever
_4_Needle bar thread guide
_5_Twin needle (optional item)
Turn off the power switch. Pull up the additional spool pin.
Place a piece of felt on the additional spool pin. Make sure
you separate the two threads by placing one thread in each
needle bar thread guide'(4_.
Change the needle to a twin needle_5_. Thread each needle
from front to back.
When you want to shift the fabric to change the sewing
direction, you must first raise the needle out of the fabric.
f
h}
/-\
\
\
J
56