Filter
Top Products
EXTENSION HOSE ASSEMBLY
t. Connect extension hose to the wand
holder by twisting and pushing down
over the wand holder to assure a good
connection,
2. Connect the extension hose by align-
ing the =J" slot with raised tabs. Push
downward and rotate clockwise to lock
in place.
For use of extension wand and hose see
ATTACHMENTS section.
Remove the Handi-Mate Jr. ® from the
plastic bag and insert Handi-Mate Jr. ®
into the vacuum cleaner as shown, then
close the Handi-Mate Jr. ® storage cover.
OPERATING INSTRUCTIONS
Tab
HandI-Mate Jr.®
Storage Cover
HoMer
1. Turn the quick
release upper cord
hook to either side
and down to
release the power
cord.
2. Release the power cord plug from the
power cord and pull the cord off the quick
release upper cord hook. Be sure the power
cord is stilllocked into the locking notch on
the upper cord hook.
3. Plug the polarized power cord into a 120
Volt outlet located near the floor.
4. To replace cord, turn upper hook counter-
clockwise pointing up, then wrap cord.
To reduce the risk of electric shock,
this vacuum cleaner has a polarized
plug, (one blade is wider than the
other.)
6
This plug will fit in a polarized out-
let only one way. If the plug does
not fit fully in the outlet, reverse the
plug. If it still does not fit, contact a
qualified technician to install the
proper outlet. Do not change the
plug in any way.
Personal Injury and Product Damage
Hazard
• DO NOT plug in if switch is in the
ON position. Personal injury or dam-
age could result.
• DO NOT use outlets above coun-
ters. Damage from cord to items in
surrounding area could occur.