Filter
Top Products
To re-attach the base plate, insert the tabs
into the slots along the front edge of the
base. Place the vacuum cleaner in full
upright position. Lower the base plate to its
original position.
Tabs
As the base is lowered the inner areas will
brush against the dust compartment wheels.
.Locking
Tabs
A gentle pull outward may assist in reassem-
bly.
m
Press the base plate down until the two
locking tabs snap into place.
I!
Slide the right latch to the right and the left
latch to the left to secure.
Return the vacuum cleaner to the upright
position before plugging into the electrical
outlet
19