Filter
Top Products
Electrical Shock Or Personal Injury
Hazard
Disconnect electrical supply before
performing maintenance or cleaning
the unit. Failure to do so could result
in electrlcal shock or personal Injury
from vacuum cleaner suddenly
starting.
TO REMOVE LIGHT BULB
Disconnect power cord from electrical
outlet. Lower handle to lay vacuum clean-
er fiat.
Pry out light lens at slots by inserting
screwdriver into slot, pushing down on the
lens and rotating the screwdriver handle
toward unit.
Flat
CAUTION
Do not use a bulb rated over 9W
(13V). During extended use, heat from
the bulb could overheat surrounding
plastic parts.
Remove the light
bulb by pulling
straight out.
To replace the
light bulb careful-
ly insert securely
into slot. Replace
lens cover.
Replace lens cover by inserting bottom tab
of lens intoslots then applying pressure to
top tabs with a screwdriver.
A "popping"sound indicates lens is snapped
properly in place.
Note: See PARTS AND FEATURES for
bulb number.
!
r ., CAUTION
Do not plug in or turn on until the
vacuum cleaner is completely
reassembled.
21