Filter
Top Products
English User Instructions KMR 1250 D
36
Emptying the waste hopper
!
Important information
Injury hazard!
No person or animal should be allowed to stand in the area traversed by the hopper while it is
being emptied.
Danger of being crushed!
Do not reach into the shafts and linkage of the emptying mechanism.
Do not stand under the hopper.
Risk of sweeper toppling over!
If the sweeper is standing on a slope with a gradient of more than 5%, it could topple over while
the hopper is being emptied. The hopper should therefore only be emptied when the gradient at
the location where the sweeper is standing is less than 5% for the direction in which it is facing.
n Stop the sweeper.
n Raise the main brush
.
Note: Following steps can only be performed with the
sweeper set to two-handed operation.
n Raise the waste hopper 1 + 2
+
When the hopper has reached the required height:
n Tip the hopper outwards 1 + 3
+
Note:
The hopper must have reached a certain minimum height
before it can be tipped out. The best position for emptying
the hopper is when it has been fully extended.
As soon as you release the button for activating the tipping
system, the hopper automatically returns to its original
position.
n Lower the hopper 1 + 4
+