Filter
Top Products
English User Instructions KMR 1250 D
34
Starting the sweeper
Initial driving trials
Carry out initial driving trials in an area where there is plenty
of free space until you are familiar with individual operating
controls and their functions.
All indications of direction (right/left, front/rear) are given in
relation to the direction of travel as seen from the driver’s
seat.
n Sit down on the driver’s seat.
The engine cannot be started until the driver has sat
down (seat contact switch). As soon as driver gets up
from the seat, the engine switches off (safety cut-out).
n Make sure that
– the LH side brush (if fitted) is in the raised position,
– the RH side brush is in the raised position,
– the main brush is in the raised position.
n Set the throttle lever to the middle position. (opera-
ting speed)
n Put the ignition key into the starting position and start the
engine.
.
n After the engine has started, push the choke back in.
Moving off and sweeping
n Lower the main brush
and, if required, the side
brush as well .
n Release the parking brake
– push the lever towards the front.
n Press driving pedal slowly
Press right pedal, machine moves forwards
Press left pedal, machine moves backwards
The travel speed can be infinitely adjusted forwards or
backwards with the respective pedal.
Avoid jerky motions of the pedal, as this can damage the
hydraulic system.