Filter
Top Products
21
Blower Operation
The optional variable-speed blower will enhance heat
circulation around the firebox and out into the room.
The blower is controlled by a heat activated switch
(snapstat) that will ONLY function when the control
switch is in AUTO setting. After the fire has been
burning for a time, the snapstat will react to the heat
and activate the blower. Fan speed may be manually
adjusted with the rheostat knob. If the burner turns off,
the blower will be shut off automatically when the
stove cools down.
If automatic blower circulation is not desired, place
the blower control switch in the MANUAL position.
M6 x 20 mm
Hex Bolts
Male
Quickconnector
Female
Quickconnector
Figure 35. Attach Blower to
the stove bottom and
connect wires to Snapstat
and female control quick
connect.
Snapstat
Connectors
Figure 37. Blower Wiring Diagram
Figure 36. Blower Controls
Speed
Control
Manual or
Automatic
Modes
ON
TSTAT
OFF
MAN
AUTO
OFF
BLOWERBURNER
CAUTION:
LABEL ALL WIRES PRIOR TO DISCONNECTION
WHEN SERVICING CONTROLS. WIRING ERRORS
CAN CAUSE IMPROPER AND DANGEROUS
OPERATION.
VERIFY OPERATION AFTER SERVICING.
ATTENTION:
Au moment de l’entrentien des commandes,
etiquietez tous le fils avant le debranchement.
es erreurs de ceblage peuvent entra tun
fonctionnement inadequat et dangereux.
SNAPSTAT
BR
BK
W
GN
BLOWER
GY
BK
RHEOSTAT
BK
BL
SWITCH
MANUAL
GY
BR
BK
W
BK
QUICKCONNECTOR
BK
BK
OFF
AUTO
BL
BL