Filter
Top Products
27
Utility Stitches
Straight stitch
Press Pattern 1 on the Visual Touch Screen.
To sew:
Raise the Presser Foot and position the fabric next to
a seam guideline on the needle plate. Lower the
needle to the point where you want to start.
Pull the needle and bobbin threads towards the rear.
Press the Start/Stop Button or Foot Control. Gently
guide the fabric along the seam guideline letting the
fabric feed naturally.
To sew from the edge of thick fabric:
The Black Button on the zigzag foot locks the foot in
the horizontal position.
This is helpful when starting sewing from extreme
edge of thick fabrics or sewing across a hem.
Lower the needle into the fabric at the point where you
wish to start sewing.
Lower the foot while pushing in the black button. The
foot will be locked in the horizontal position to avoid
slipping.
1 Thick fabrics
2 Black Button
Changing sewing direction:
Stop the machine and bring the needle down into the
fabrics by pressing the needle Up/Down button.
Raise the presser foot.
Pivot the fabric around the needle to change the
sewing direction as desired.
Lower the presser foot and start sewing in a new
direction.
A Z
Straight Stitch
1 2 3
4
5 6
7 8 9
10
11 12
A
Auto
SET
Adjust
3
1
2