Filter
Top Products
You need to perform the preceding operations only once for creating a network
connection. After the network connection is created, to access the network,
double-click the icon for the dial-up connection, and then click Connect in the
displayed dialog box.
4 Configuring the Wireless Network
Connection
If a wireless network adapter is installed on your computer, you can connect you
computer to the HG622 through a wireless connection.
The hardware installation methods and driver installation methods of wireless
network adapters provided by different companies vary from each other. For
details, see the installation guide provided by the wireless network adapter
provider.
Setting Up a Wireless Connection Through the WPS Button
The HG622 supports the Wi-Fi Protected Setup (WPS) function. If your network
adapter also supports the WPS function, you can use the WPS function to set up a
wireless connection between your PC and the HG622 quickly. To set up a wireless
connection, do as follows:
Step 1
Enable the wireless network function, and set the wireless network name and
access password of the HG622, do as follows (taking the authentication type
WPA-PSK as an example):
1. Log in to the Web-based configuration utility of the HG622.
2. In the navigation tree on the left of the Web-based configuration utility,
choose Basic > WLAN.
3. Select the Enable WLAN option.
4. Enter a wireless network name in the SSID text box.
5. Select WPA-PSK from the Security drop-down combo box.
6. Enter an access password in the WPA pre-shared key text box.
7. Select AES from the WPA encryption drop-down combo box.
8. Click Submit to save the settings.
Step 2
Press the WPS button of the HG622 to enable the HG622 to enter the WPS
negotiation state.
Step 3
Enable the WPS negotiation function of the wireless network adapter on your
PC within two minutes, and then wait for a moment (typically 10s and at most
120s).
10