Filter
Top Products
© 2001 Directed Electronics, Inc. Vista, CA 27
■ Door input does not immediately trigger full alarm. Instead, first I hear chirps for three seconds.
That’s how the progressive two-stage door input works! This is a feature of this system. This is an instant trigger,
so even if the door is instantly closed, the progression from chirps to constant siren will continue.
■ Closing the door triggers the system, but opening the door does not.
Have you correctly identified the type of door switch system? This often happens when the wrong door input has
been used.
■ The system will not passively arm until it is remotely armed and then disarmed.
Are the door inputs connected? Is a blue wire connected to the door trigger wire in the vehicle? Either the green
H1/5 or the violet H1/7 should be used instead.
■ Door input does not respond with the progressive trigger, but with immediate full alarm.
Which zone does the LED indicate? If the LED indicates that the impact sensor caused the trigger, the sensor may
be detecting the door opening. Reducing the sensitivity or relocating the control module can often solve this
problem.
■ The Valet/program switch does not work.
Is it plugged into the correct socket? Check the System Features Learn Routine for the programmed Valet/program
switch pulse count.
■ Status LED does not work.
Make sure that it is plugged in. (See the Plug-In Harnesses section of this guide.) Is the LED plugged into the
correct socket?