Filter
Top Products
24 © 2001 Directed Electronics, Inc. Vista, CA
2. Then press the Valet/program switch once more and HOLD it. For example, if you just programmed the second
feature and you would like to program the seventh feature in the menu, you would press and release the
Valet/program switch five times. Then press it once more and HOLD it. The siren would chirp seven times to
confirm access to the seventh feature.
The learn routine will be exited if any of the following occur:
■ Close the open door.
■ Turn the ignition on.
■ No activity for longer than 15 seconds.
■ Press the Valet/program switch too many times.
system features menu
1 ACTIVE/PASSIVE ARMING: When active arming is selected, the system will only arm when the transmitter is
used. When set to passive arming, the system will arm automatically 30 seconds after the last door is closed. To
alert the consumer of passive arming, the siren will chirp and the parking lights will flash 30 seconds after the
door is closed.
2 AUDIBLE ARM/DISARM CONFIRMATION ON/OFF: This feature controls the chirps that confirm the arming
and disarming of the system. In the ON setting (default) the siren will provide audible confirmation when arming
and disarming the system. If programmed to the OFF position no siren chirps will be heard when arming or
disarming.
ONE CHIRP - PRESS TWO CHIRPS - PRESS
FEATURE LOCK BUTTON UNLOCK BUTTON
1 - Arming Active Passive
2 - Audible Arm/Disarm Confirmation ON OFF
3 - Siren Duration 30 Seconds 60 Seconds
4 - Door Trigger Instant Delayed
5 - Door Trigger Error Chirp ON OFF
6 - Sensor Shunt Zones 2 and 4 All zones
7 - Pressing Lock Button Twice Within 3 Seconds Activates Panic Activates auxiliary output
8 - No feature
9 - Valet/Program Switch Pulse Count 1 pulse 2 to 5 pulses
Default settings are indicated in bold text.