Filter
Top Products
How to use
Power nozzle
The power nozzle adjusts automatically for cleaning hard surface floors
and various heights of carpet.
The agitator may be turned off by
unplugging power nozzle cord from hand grip when cleaning irregular
floor sutfaces such as brick, slate, and certain parquet floors.
This will
stop the agitator from rotating. If desired, a special Wall/Floor Brush
(shown in Cleaning Tools section) can be purchased for this task.
Handle positions
The handle has two positions
when used with the power
nozzle:
upright
and
operating.
To lower handle to operating
position, place your foot on the
power nozzle and push handle
down.
Edge cleaning
Brushed
edge cleaning is
provided on the right side of the
nozzle to remove imbedded dirt
in carpet near baseboards and
furniture.
Standard
edge cleaning is
provided on the left side of the
nozzle to remove surface dust
and litter.
Guide right or left side of nozzle
along edge of carpet for type of
edge cleaning desired.
Suction regulator
The suction regulator is located
on the hand grip and may be used
to increase or decrease suction
for various cleaning tasks.
If power nozzle is difficult to push
on some carpet, open suction
regulator. This will prevent
damage to the belt.
7