Filter
Top Products
Clearing obstructions
Remove larger items from carpet
and floor surfaces before
vacuuming to help prevent
obstructions in the hose, wands
or nozzle connector, and
maintain the cleaning
effectiveness of your cleaner.
I
To check for obstructions, first
turn cleaner off and
disconnect
from electrical outlet; then dis-
connect power nozzle plug and
wands from hand grip.
Plug
cleaner in, turn on, and check
hose end for suction. Remove any
obstructions. Remove power
nozzle from wands and attach
wands to hose. Check for suction
and remove any obstructions.
Before
attaching power nozzle to
wands, check nozzle connector.
Push nozzle connector down to
lowest position. Look into nozzle
connector and remove any
obstructions.
Secondary filter
To clean secondary filter
Disconnect cleaner from elec-
trical outlet.
The secondary filter, behind the
throw away bag, protects the
motor from dirt particles. If filter
becomes dirt, lift it out and wash
in warm water or replace it with a
new one. A dry filter must be put
back into cleaner.
Do not operate cleaner without
the secondary filter in place.
12