Filter
Top Products
To connect and
remove tools
To connect tools, insert end of
tool into extension wand and
snap into position. To disconnect,
press down on the center of the
spring latch and remove tool.
Tools may be attached to hand
grip by rotating plastic latch ring
until the slots in the opening
align. Insert tool and turn latch
ring, as shown, to lock tool in
place.
To remove tool, reverse the
above procedure.
The power cord leading from hose
connection to receptacle on
cleaner base need not be con-
nected when using the cleaning
tools.
-However, to avoid
damage to cord, leave cord
connected to receptacle.
To clean stairs
Clean stairs by placing cleaner on
end as pictured in the illustration.
Clean stairs from bottom to top.
9