Filter
Top Products
The belt
The belt in your power nozzle drives the agitator. It has been designed
specifically for use in this cleaner and is important for effective
operation. There are other belts manufactured that are similar in shape
and size but are not designed for the HOOVER power nozzle. Such belts
do not operate the agitator correctly and may create stress which could
damage your power nozzle. Use
only
a genuine HOOVER Belt No.
38528-011
when a belt replacement is necessary.
When to replace the belt
The belt, located under the nozzle cover, should be checked from time to
time to be sure it is in good condition. Remove nozzle cover as shown
below. Replace belt if it is stretched, cut, or broken.
How
to replace the belt
Disconnect cleaner from elec-
trical outlet and disconnect
power nozzle from extension
wands.
Turn nozzle over and unscrew
the 2 Phillips head screws from
the nozzle base.
Return nozzle to original position
and lift up back of nozzle cover.
Rotate cover forward and lift it
off the nozzle.
To remove the agitator, position
hand underneath nozzle base at
agitator opening and push up belt
end of agitator. Remove agitator
and old belt.
13