Filter
Top Products
Maintain front connection, while
rotating cover over nozzle base.
Pull nozzle cord through opening
in cover.
Turn nozzle over and replace
screws.
Agitator brushes
and brush roll
When to replace brushes
Disconnect cleaner from elec-
trical outlet.
To check condition of brushes,
move edge of card across agitator
opening while turning agitator.
To maintain cleaning effective-
ness, replace brushes if they do
not touch card.
How to replace agitator
brushes
Disconnect cleaner from elec-
trical outlet and disconnect
power nozzle from extension
wands.
Remove nozzle cover, agitator
and belt following directions in
“How to replace belt” section.
1. Hold agitator as shown. Turn
end plates in opposite directions
until one end plate comes off.
R
?
END PLATES
15