Filter
Top Products
How to assemble
1. Connect hose
Insert hose end with cord into
opening of cleaner, lining up
largest projection on hose with
largest notch of opening. Turn
hose to the right to tighten.
When hose is attached properly,
hose cord plug will reach to
receptacle on cleaner.
Insert plug as deeply into the
receptacle as possible.
To disconnect hose, first remove
hose cord plug from receptacle.
Then, depress latch and turn
hose to the left.
2. Attach power nozzle
and extension wands
Attach wand to power nozzle by
fitting button projection on
nozzle connector into opening
near end of wand. Be sure nozzle
is locked in place.
To release, press down on center
of latch and remove nozzle.
HOSE CORO
PLUG
A