Filter
Top Products
How to store
Your cleaner can be stored on
end as shown in the illustration.
Store power nozzle with handle
in upright position.
The hose, extension wands and
power nozzle can be stored dis-
assembled from the cleaner if
desired.
Maintenance
The following sections are concerned with proper maintenance of the
cleaner. Familiarize yourself with these home maintenance tasks and
keep this owner’s manual in a convenient place where you can refer to it
when needed. Proper use and care of your cleaner will ensure continued
cleaning effectiveness.
The bag
When to replace
Check bag from time to time. When bag if filled with dirt, replace it and
discard used bag.
The cleaner will not operate effectively if the bag is completely full or of a
large item or clog is caught in the nozzle or at the opening of the bag. An
internal thermal protector has been used in your cleaner to prevent
overheating under these conditions. When the blockage is not
removed, the thermal protector will trip and the cleaner will stop
running.
If this happens, turn cleaner OFF and
disconnect cleaner from
electrical outlet. Then disconnect nozzle and remove obstruction.
Within 15 minutes the thermal protector will cool and automatically
reset!
then cleaning may resume. If cleaner does not operate, allow
addrtronal
time for thermal protector to reset.
CAUTION: Very fine materials, such as face powder, cornstarch, fire-
place ashes or fireplace soot, may seal the throw away bag and may
cause it to burst even though it is only partially full of dirt. When the
cleaner is used to remove material of this nature, the bag should be
changed frequently.
Where to buy bags
Bags may be purchased from your local Authorized Hoover Dealer or
from a Hoover Factory Service Center.
When ordering bags, be sure to
give the model number of your cleaner.
10