Filter
Top Products
Presscordintocordcliponbackof
handle,Pullcordtightandwrapcord
aroundhooks(A2),
I / :,,_1
ii' iii
Storing hose (_z tools
Store hose on holder by first positioning
hose in front section of clip,
Continue wrapping hose under lower
hook (F), Snap hose end fully into hold-
er (G).
Ensure that the hose end is pushed
down completely into holder (G).
Slide
crevice tool (H) into Iqolder"[......
models only),
Position stairtupholstery nozzle in holder
at base of cleaner and snap it into plac{;
as shown at arrow,
Insert end of bare floor attachment
(som(; models only) into holder and snap
into clip as showm,
Powered hand Loci
The powered hand tool is shipped in a
plnstic bag for protection, Remove the
bag before using the tool by first open-
iiqg tool door.
To remove powered hand tool (I), pull it
down and outward.
To r0.position the tool, roverse this proce-
dure,
To remove the scrub module* (J), grasp
it atthe sides and pull it forward,
To reposition module_ fit tabs in the stor-
age area into holes on back of module,
Push module to snap it securely into
position,
_incllJded with some models, storage on
LS mod_.l only
How to reattach tool
cover
The tool cover Is deslglqed with a break-
away feature which allows it to snap free
if it is pushed open too far,
To reattach, align hinges of cover with
holes on sides of tool storage area,