Filter
Top Products
E
N
G
L
I
S
H
- 6 -
DURESS CODE
A duress code can be used if you are forced to disarm your security system under
duress. Your duress code is +1 to your code (1234 => 1235, 6789 => 6780). The
system will disarm as normal however a silent alert signal is transmitted to your
Alarm Receiving Centre.
INCORRECT CODE PROTECTION
If you enter five successive incorrect codes or present five incorrect TAGs, the keypad is
blocked for 5 minutes.
SENDING A PANIC SIGNAL
You can send an instant panic alarm whenever you feel threatened whilst at home,
even when your system is not armed :
Press the “SOS” keys simultaneously.
The siren is triggered (depending on configuration).
The Alarm Receiving Centre is alerted.
KEYPAD DISPLAY
Your keypad is equipped with a display to ease access to advanced user functions and rich content.
Menu functions are only accessible when the system is disarmed.
The display icons provide a quick view of the system status.
The navigation keys are used to access the menu:
• Press the arrow keys to enter the main menu, navigate and view choices identified by
brackets “< >”,
• Press the key to confirm your choice,
• Press the Return key to abort your choice and return to the main menu.
Code + 1
Total set armed
Part set armed
Annex set armed
System disarmed
Annex set disarmed
Receiver 1 ON
Receiver 2 ON
Radio transmission in progress
Silent mode
Unread message
Detector activated
Tamper fault
System fault
Bypassed detector
Power supply fault
State of keypad battery
Blinking = replace battery