Filter
Top Products
Introduction
Your Galant panel has various system functions, which can be accessed
by one of three methods:
• type a user code at a keypad
• press a button on an RF keyfob or
• present a keytag to a proximity reader.
The system can support up to 8 users. User 1 is assigned as the master
user. Each user can have a user code (master user code is 1234 by
default) and either a fob or a tag. Your installer will indicate which
methods are available on your system.
The following diagram shows an RF keyfob:
The following diagram shows a proximity card reader and keytag
4
1. Unset/Cancel
2. Begin Full Set procedure
3. Begin Part Set procedure
4. Begin Night Set procedure
keytag
Keytag presented to
proximity reader to set
and/or unset system.