Filter
Top Products
Chime
The Chime function allows you to set up a zone to cause a chime tone
to activate on the internal sounder and keypad, every time a particular
zone is opened. This is particularly useful to warn if a door has been
opened.
To set up a zone for Chime:
1. Type in your User Code.
2. Press 9 (CHIME).
3. Type in the zone number for the zone to be
set up for chime. Each zone is a double
digit (e.g. 03 or 14).
4. Repeat step 3 for any other zones.
5. Press the * key to finish. The display will
Show that the Chime function is activated.
Chime
To disable the Chime function:
1. Type in your User Code.
2. Press 9 (CHIME)
3. Press the * key.
Setting the Time and Date
The system contains a clock which, is used to mark every event
recorded in the event log. This can be set, if required, as follows:
01-06-02 14 : 55
dd-mm-yy hh:mm
00-00-00 00 : 00
dd-mm-yy hh:mm
1. Type in the Master Code
2. Press # then 7.
3. Type in the time and date in the following
order with 2 digits each for day, month,
year, hours and minutes. (24 hr format.)
11