Filter
Top Products
Glossary
The following terms will be used in this manual:
Alarm: A panel detection circuit has been tripped.
Cancel:
The action of stopping an alarm condition.
Keyfob: A remote control device for setting and unsetting. Each
fob will belong to a user.
Keytag: A tag or card which can be used for setting and
unsetting. Each tag will belong to a user.
Keypad: The user interface device that displays system
conditions and allows user control.
Reset:
The action of clearing the alarm or fault condition and
restoring the system to the steady state condition.
Tamper: A fault condition on a detector or system module.
User: Any person who accesses the system. This system can
have up to 8 users (number 1 to 8).
User Code:
A 4 digit code used to identify a particular user to the
system.
Zone: A unique detection circuit to which a detector is
connected. There are also 'internal' system zones which
monitor the health of the system.
3