Honeywell 6160EX Garage Door Opener User Manual


 
Omitting Zones From the System.
To allow flexibility, you can temporarily disable individual detection
zones. This is called ‘Omitting’. Once a zone is omitted, it will be
disabled for the duration of the next set period. When the panel is next
unset, the zone will be enabled again.
To Omit any zone:
1. Type in your User Code.
2. Press 6 (OMIT).
3. Type the zone number to be omitted. Each
zone number is a double digit (e.g. 03 or
14). The display will show the zone.
Omitted ZN:03
Zone 3
4. Repeat step 3 for any other zone if needed.
5. Press the * key to finish or wait 5 seconds.
The system can now be set in the normal way.
Clearing Omitted zones (Un-omit)
To un-omit zones and return to normal operation:
1. Type in your User Code.
2. Press 6 (OMIT).
3. Press the * key.
When you hear the two confirmation beeps, all zones will be re-
enabled.
10