Honeywell 4110XM Home Security System User Manual


 
34
Summary of Audible/Visual Notification
SOUND CAUSE DISPLAY
LOUD, INTERRUPTED
Keypad & External
FIRE ALARM
FIRE and ALARM are displayed; protection zone in alarm
is displayed.
LOUD, CONTINUOUS
Keypad & External
BURGLARY/AUDIBLE
EMERGENCY ALARM
ALARM is displayed; protection zone in alarm is also
displayed.
ONE SHORT BEEP
(not repeated)
Keypad only
a. SYSTEM DISARM
b. SYSTEM ARMING ATTEMPT
WITH AN OPEN ZONE
c. BYPASS VERIFY
a. Only READY is displayed. Green READY indicator (if
present) is lit.
b. NOT READY is displayed, open protection zone number
is displayed.
Green READY indicator (if present) is not lit.
c. The bypassed protection zone numbers are displayed.
(One beep for each number displayed.) BYPASS
displayed.
ONE SHORT BEEP
(once every 40 seconds)
Keypad only
SYSTEM IS IN TEST MODE Opened Zone identifications will appear.
ONE BEEP every 40 sec.
Keypad only
TROUBLE CHECK displayed. Troubled protection zone is displayed.
TWO SHORT BEEPS
Keypad only
ARM AWAY OR MAXIMUM AWAY and (if MAXIMUM) INSTANT are displayed.
THREE SHORT BEEPS
Keypad only
a. ARM STAY OR INSTANT
b. ZONE OPENED WHILE SYS-
TEM IS IN CHIME MODE
c. ZONE OPENED WHILE SYS-
TEM IS IN TEST MODE
a. STAY and (if INSTANT) INSTANT are displayed. Red
ARMED indicator is lit.
b. CHIME displayed. Pressing / READY key will display
opened zone.
c. Open protection zone number is displayed.
RAPID BEEPING
Keypad only
MEMORY OF ALARM FIRE and/or ALARM is displayed; zone in alarm is
displayed.
SLOW BEEPING
Keypad only
ENTRY DELAY WARNING None during delay; Exceeding the delay time without
disarming causes alarm.
If bell is used as external sounder, fire alarm is pulsed ring; burglary/audible emergency is steady ring.
Notes: BAT displayed (with no beeping or zone number) indicates system main battery is weak see “Check” and
“Battery” Displays under TROUBLE CONDITIONS
• Also see Power Failure, and Other Displays under TROUBLE CONDITIONS.