Filter
Top Products
Checking for Open Zones
–
14
–
Using the
✻
✻✻
✻
READY Key
Before your system can be armed, all protected doors, windows and other protection
zones must be closed or bypassed (see BYPASSING PROTECTION ZONES section),
otherwise the keypad will display a "Not Ready" message, and if your keypad has a
READY indicator light, it will not be lit. The READY key can be used to display all
faulted zones, making it easier for you to secure any open zone.
To display faulted zones, simply press and release the READY key (do not enter code
first). Secure or bypass the zones displayed before arming the system.
A "Ready" message will be displayed when all protection zones have been either
closed or bypassed and the keypad's READY indicator light (if present) will be lit.
TYPICAL DISPLAYS
WHEN NOT READY TO ARM
AC
NOT READY
4110-002-V0
INDICATING FAULTED PROTECTION ZONE
(AFTER PRESSING READY KEY)
AC
NOT READY
4110-003-V0
INDICATING "READY TO ARM"
AC
4110-004-V0