Filter
Top Products
Fire Alarm System
– 29 –
IF INSTALLED
General
Your fire alarm system (if installed) is on 24 hours a day, for continuous protection.
In the event of an emergency, the strategically located smoke and heat detectors will
automatically send signals to your system, triggering a loud, interrupted sound from
the Keypad. An interrupted sound will also be produced by optional exterior
sounders. A FIRE message will appear at your Keypad and remain on until you
silence the alarm.
In Case Of Fire Alarm
1. Should you become aware of a fire emergency before your detectors sense the
problem, go to your nearest Keypad and manually initiate an alarm by pressing
the panic key pair assigned as FIRE emergency (if programmed by the installer).
See the “PANIC KEYS” section.
2. Evacuate all occupants from the premises.
3. If flames and/or smoke are present, leave the premises and notify your local Fire
Department immediately.
4. If no flames or smoke are apparent, investigate the cause of the alarm. The zone
number(s) of the zone(s) in an alarm condition will be displayed at the Keypad.
TYPICAL "FIRE EMERGENCY" DISPLAY
ALARM
SUPV NO AC
PHONE TEST
NOT READY
CHIME BAT
FIRE
CHECK INSTANT TAMPER
05
FIXED-WORD