Honeywell 4110XM Home Security System User Manual


 
Entry/Exit Delays
– 13 –
General Information
Your system has preset time delays, known as exit delay and entry delay. When you
arm your system, exit delay gives you time to leave through the entry/exit door
without setting off an alarm. Entry delay gives you time to disarm the system when
you re-enter through the entry/exit door. The system must be disarmed, however,
before the entry delay period ends, or an alarm will occur. The keypad will beep
slowly during the entry delay period, reminding you to disarm the system.
You can also arm the system with no entry delay at all by using either INSTANT or
MAXIMUM arming modes. These modes can provide greater security while you are
sleeping or while you are away for extended periods of time.
See your installer for your delay times and record them here:
Exit Delay: seconds
Entry Delay: seconds