Filter
Top Products
Arming the System
(cont’d)
– 17 –
Using the
2
AWAY Key (Arms Entire System, Entry Delay On)
Use this key when no one will be staying inside.
Before Arming close all doors and windows (see CHECKING FOR OPEN ZONES).
1. Enter your security code and press the AWAY key.
2. The keypad will beep twice and will display the armed message. The red ARMED
indicator will light.
3. You may leave through an entry/exit door during the exit delay period without
causing an alarm.
After exit delay, the system arms and will sound an alarm if a protected window or
non-entry/exit door is then opened, or if any movement is detected inside your
premises.
You may reenter through an entry/exit door, but must disarm the system within the
entry delay period to avoid an alarm.
TYPICAL DISPLAY
"ARMED AWAY"
ALARM
AWAY
BYPASS
STAY
SUPV NO AC
PHONE TEST
NOT READY
CHIME BAT
FIRE
CHECK INSTANT TAMPER
FIXED-WORD