Filter
Top Products
Arming the System
(cont’d)
–
18
–
Using the
4
MAXIMUM Key (Arms Entire System, Entry Delay OFF)
Use this key when the premises will be vacant for extended periods of time
such as vacations, etc, or when no one will be moving through protected
areas.
Before Arming close all doors and windows (see CHECKING FOR OPEN ZONES).
1. Enter your security code and press the MAX key.
2. The keypad will beep twice and will display the armed message. The red ARMED
indicator will light.
3. You may leave through an entry/exit door during the exit delay period without
causing an alarm.
After exit delay, the system arms and will sound an alarm if a protected window or
door is then opened, or if any movement is detected inside your premises.
An alarm will sound immediately if anyone opens an entry/exit door.
TYPICAL DISPLAY
"ARMED MAXIMUM"
ALARM
AWAY
BYPASS
STAY
SUPV NO AC
PHONE TEST
NOT READY
CHIME BAT
FIRE
CHECK INSTANT TAMPER
FIXED-WORD