Hitachi EP-A7000 Air Cleaner User Manual


 
E-17
Max(Blinking)
Skin
MoisturizeHumidify
Strong
Deodorization
Auto
Pollen
Air Purify
Useful Feature
Dimmer Control
If you feel uncomfortable about indicator lightings when you go to sleep, press button on the
purifier unit for 3 seconds or longer to dim the indicators.
Press button for 3 seconds
or longer.
The indicators are dimmed.
How to set/cancel
Every time you press button, “Set”
and “Cancel” will alternate.
The setting will be saved in memory.
Memory Function / Sensors / Auto Detection Useful Feature
Press
button.
Eco Operation
In the eco operation mode, the unit automatically pauses when the air in the room is clean to save
money on electricity. Furthermore, if this state continues more than 8 hours, the unit automatically
stops operation. (In humidifying operations, the unit will not pause at a certain humidity level.)
Normal automatic operation
When the air is clean, the unit continuously operates at
“Silent” airfl ow. (In the strong deodorization mode, the
airfl ow rate is set to “Low”.)
Eco operation
When the air is clean and “Silent” operation continues
for 10 minutes or longer, the fan stops for about 50
minutes and the unit intermittently operates at “Silent”
airfl ow for about 10 minutes.
If this state continues more than 8 hours, the unit
automatically stops operation.
The mode is set to eco operation.
“eco” indicator is lit.
How to set/cancel
Every time you press button, "Set" and
"Cancel" will alternate.
The settings are stored.
On
Silent
operation
Stop
10 minutes
10 minutes 10 minutes
50 minutes 50 minutes
Silent
operation
Stop
The degree of air contamination is detected by the odor sensor and dust sensor during eco operation. If the sensors detect
odor or dust, the airflow rate switches according to the degree of air contamination. When the air becomes clearer and the
unit runs for 10 consecutive minutes or longer at “Silent” airflow, the unit starts intermittent operation.
When using the air purifier together with the Hitachi air purifier with ionizing function
Pressing the button on the remote controller in front of the Hitachi air purifier with ionizing function (model whose
ionization setting / release is switched using the remote controller) sets and releases ionization. Furthermore, pressing
the ionizing button on the remote controller of the model with the ionizing function sets and releases eco operation.
Note
T_S-EP-A7000.indd 17T_S-EP-A7000.indd 17 12/7/2011 2:48:03 PM12/7/2011 2:48:03 PM