Filter
Top Products
E-14
)
Max(Blinking)
Timer(4hrs)
Skin
Moisturize
Clean
Humidifying
Filter
Air
Sensor
Memory Function / Sensors / Auto Detection
Memory Function
When you stop the operation and then restart, the purifi er will resume the operation status before shutdown.
If you operate the purifi er for approx. 5 seconds or longer, the operation status will be stored in memory.
(If you stop the operation within less than 5 seconds, the operation status will not be stored in memory.)
Even if you unplug the power cord, the operation status will be stored in memory. However, the airfl ow rate is
automatically set to “Auto”.
Air Sensor
Level of air contamination detected by the odor sensor, dust sensor is shown by the way the indicator is activated.
Indicator action : Lit in green Blink in green
Contamination level: Clean Contaminated
Note
You can adjust the air sensor, dust sensor sensitivity setting as desired.
P.E-16
In case the purifi er is installed in a place where air contamination is hard to detect
or in case the sensor itself is not clean, the indicator action may not change.
P.E-25
Odor Sensor
The sensor detects odor in air such as cigarette smoke or odor of pet animals.
Even when you feel the air is clean, the purifier may continue the operation if the
odor sensor finds any gas component not removed by the filter.
Any of the following may also be detected by the odor sensor.
Combustion gas from heating appliance, alcohol, odor of perfumes or cosmetics
used in beauty parlor or aesthetic salon, sprays, vapor, abrupt temperature
change, etc.
Odor sensor
Using the Control on Purifi er
Press
button.
Operation starts.
Every time you press
button, the operation
mode switches in the following sequence so that you
can choose a desired mode or stop.
The airflow rate is set to “Auto” by switching the
operation mode.
Air
Purify
Pollen
Strong
Deodorization
Humidify
Skin
Moisturize
Off
T_S-EP-A7000.indd 14T_S-EP-A7000.indd 14 12/7/2011 2:48:02 PM12/7/2011 2:48:02 PM