Filter
Top Products
E-3
Operation Buttons and Indicators /
Features / Name of Each Component / Operation Buttons and Indicators / Accessories
P.E-OO shows a page with further description.
Operation Buttons and Indicators
Indicates approx. humidity level in the
room during operation.
Low Moderate High
Orange Orange Orange OrangeGreen
On/Off Button
P.E-14
Use this button to start or stop opera-
tion and to switch the operation mode.
Infrared Remote Receiver
Receives remote control
signal.
Timer
P.E-13
The indicator is lit when
4-hour timer is set.
(Indicator: Green)
Air Sensor
P.E-14
Level of air contamination detected by the
dust sensor and odor sensor is shown by
how the indicator is lit. (Indicator: Green)
Remote Controller
Point the remote controller at the infrared receiver on the purifier when you operate.
The remote controllable distance is approx. 6m maximum when pointing the remote
controller squarely to the receiver.
On/Off Button P.E-10
Press this button to start or
stop operation.
eco Button
P.E-17
Press this button to start or
stop eco operation.
Max button P.E-13
Press this button to start
max operation.
Airflow Button P.E-12
Press this button to switch
airflow rate.
Mode Button P.E-11
Press this button to switch
operation mode.
Timer Button P.E-13
Press this button to set
Off-timer.
Sensor Setting Button
P.E-16
Press this button to switch
sensor sensitivity.
Note
The remote control may not work in a room where inverter lighting apparatus or electronic quick
start lighting apparatus is used, or when the infrared receiver is exposed to direct sunlight.
If you operate the remote controller not pointing straight to the front face of the purifier, the sensitivity
will be reduced. Operate the controller from the place in front of the purifier whenever possible.
Shows the operation mode.
Air Purify, Pollen, Strong
Deodorization
Indicator: Green
Humidify, Skin Moisturize
Indicator: Orange
Operation Mode P.E-11
Humidity Level
P.E-10, 15
Airflow Level P.E-12
Indicates airflow rate during operation. (Indicator: Green)
: Airflow rate during auto operation
: Indicates eco operation is active.
When airflow rate is switched using the
airflow button on the remote controller, the
selected airflow rate is indicated.
: Silent
: Med
: Strong or Max (blinking)
Auto
Shows the time to
clean the humidifying
filter. (Indicator: Red)
Clean Humidifying
Filter
P.E-18
T_S-EP-A7000.indd 3T_S-EP-A7000.indd 3 12/7/2011 2:47:42 PM12/7/2011 2:47:42 PM