Filter
Top Products
Using Step Sweep
1. Refer to menu map 2.
2. Press FREQUENCY
[e].
3.
Select
Step Swp Menu.
4.
Select
Step Size.
Enter the desired increment value.
5.
Select Step Points.
Enter the number of points desired.
6.
Determine the dwell time desired, select Step Dwell and enter
a value, or choose the dwell time determined by the ramp mode
sweep time, select
ISwe
Coupled .
7.
Determine the triggering scheme, select
Step Swp Pt Trig Auto ,
Bus, or Ext
8. Press SWEEP (MENU).
9.
Select Sweep Mode Step, to activate the step frequency mode.
Getting Started Advanced
l-5
1