Filter
Top Products
Z
Zero Freq
Function Group
Menu Map
Description
Programming Codes
See Also
SYSTEM
8
This softkey lets you enable a security feature that displays zeroes for
all accessible frequency information. Once this security feature is
activated, it can be turned off by a front panel (PRESET). An asterisk
next to the key label indicates that this feature is active.
SCPI: SYSTem:SECurity[:STATe] ON
Analyzer: NONE
Security Menu
Waveform Menu
Function Group
LMOD)
Menu Map
4
Description
The waveform menu (Option 002 only) allows you to choose sine,
square, triangle, ramp, and noise waveforms for internal AM and
FM. The default is sine wave. There are two waveform menus. The
waveform menu in the AM menu sets the waveform for amplitude
modulation only. The waveform menu in the FM menu sets the
waveform for frequency modulation only.
Programming Codes
SCPI: NONE, see the individual softkeys listed.
Analyzer: NONE
See Also
(MOD_),
also see “AM”,“FM”, and “Modulation”.
HP 8360
User’s Handbook
Operating and Programming Reference
Z-1