Filter
Top Products
Step Points
Programming Codes
SCPI:
SWEep:CONTrol:STATe ON]OFF]l]O
SWEep:CONTrol:TYPE
SLAVe
Analyzer: NONE
See Also
Step Control Master, Step
Swp
Menu
Step Dwell
Function Group
FREQUENCY
Menu Map
2
Description
This
softkey
lets you set dwell times for points in the stepped
frequency mode of sweep operation. The dwell time for points in step
frequency sweep may range from 100
pus
to
3.2s.
The actual time
between points is the sum of dwell and phase lock times.
Select Step Dwell , then use the entry area to enter the desired
value.
Programming Codes
SCPI:
SWEep[:FREQ
uency]:DWELl<num>[time suffix] or
MAXimum]MINimum
Analyzer: NONE
See Also
Step
Swp
Menu,
Sweep
Mode Step
Step
Point3
Function Group
FREQUENCY
HP 8360
User’s Handbook
Operating and Programming Reference
S-67