Filter
Top Products
Measure
Cm-r
811
Markers All Off
Function Group
Menu Map
Description
Programming Codes
See Also
MARKER
3
This softkey lets you turn all the markers off. The frequency value
given to the markers remains in memory and will be recalled when
the marker
softkeys are pressed again. Softkeys
Amp1
Markers ,
Center=Marker
, and Ml--M2 Sweep are not affected by turning the
markers off. The function (or the frequency values) is retained as the
synthesizer settings.
SCPI: MARKer:AOFF
Analyzer: SHMO
Amp1
Markers ,
Center=Marker,
Ml--M2
Sweep,(MARKER)
“Marker Operation,” in Chapter 1.
“Programming Typical Measurements,” in Chapter 1.
Measure Corr All
Function Group
Menu Map
Description
Programming Codes
See Also
HP 8360
User’s Handbook
POWER
5
This
softkey
enables the synthesizer to act as a controller to
command an HP
437B
power meter to measure flatness correction
values at all frequency points defined in the flatness array.
SCPI: NONE
Analyzer: NONE
Fitness
Menu, Mtr
Meas
Menu
“Creating and Applying the User Flatness Correction Array,” in
Chapter 1.
Operating and Programming Reference
M-7