HP (Hewlett-Packard) 22A Vacuum Cleaner User Manual


 
List
Menu
LINE SWITCH
Function Group
Menu Map
Description
Programming Codes
See Also
HP 8360
User’s Handbook
NONE
NONE
The line switch (on/off switch) has two positions, off or standby and
on. If line power is connected to the synthesizer and the line switch
is set to off, the synthesizer is in the standby state (amber LED on).
Standby provides power to the internal frequency standard oven.
When line power is connected and the line switch is set to on, the
synthesizer power supplies are enabled and a limited self-test is
initiated. The CPU self test is performed; power supplies and the
front panel processor are checked.
NONE
“INSTALLATION” for information on fuses.
“Error Messages” for information on messages displayed at power on.
List Menu
Function Group
FREQUENCY
Menu Map
2
Description
This
softkey
allows access to the frequency list functions.
Auto Fill
lncr
Automatically creates a frequency list using the
user-specified increment value.
Auto Fill
%Pts
Automatically creates a frequency list
containing a user-specified number of points.
Auto Fill Start
Allows the entry of a start frequency for the
frequency list.
Auto Fill Stop
Allows the entry of a stop frequency for the
frequency list.
Delete Menu
Reveals the frequency list delete menu.
Enter
List
~~~11 Allows the entry of a dwell time for a frequency
point in the frequency list.
Enter List Freq
Allows the entry of a frequency point into the
frequency list.
Operating and Programming Reference
L-5