Filter
Top Products
l
SWEep:DWELl
<num>[time
suffix]
lMAXimumlMINimum
l
SWEep:DWELl?
CMAXimumIMINimum]
Sets and queries the amount of time in seconds that the synthesizer
stays (dwell) at each step after reporting a source settled
SRQ
and
pulsing the Trigger Out line low. This one value is used at each step
when
in
the
SWE:TRIG:SOUR IMM modeofa stepped sweep. Setting
SWEep:DWELL
setsSWEep:DWELl:AUTO
OFF.
*RST
valueis
100
ps.
l
SWEep:DWELl:AUTO
ONlOFFlllO
l
SWEep:DWELl:AUTO?
Sets and queries the state of the automatic dwell calculation switch.
Setting
SWEep:DWELL sets SWEep:DWELl:AUTO OFF.
*RST
state is OFF.
Combining the Sweep Mode With the Sweep Generation Command
to Obtain the Desired Sweep Condition
Description of
Sweep Condition
CW Non-swept
Analog freq sweep
Manual analog
freq
sweep
Stepped freq sweep
Manual step freq sweep
CW with analog power
sweep
CW with manual analog
power sweep
CW with stepped power
sweep
CW with manual stepped
power sweep
Analog frequency and
power sweep
Manual analog frequency
and power sweep
Stepped frequency and
power sweep
Manual stepped frequency
and power sweep
List sweep
Manual list sweep
FREQ
:POW
:MODE
:MODE
cw
FIX
SWE FIX
SWE
FIX
SWE
FIX
SWE
FIX
cw SWE
cw SWE
cw
SWE
cw SWE
SWE
SWE
SWE
SWE
SWE
SWE
SWE
SWE
LIST
ignored
LIST
ignored
SWE
:LIST
:MODE :MODE
ignored ignored
AUTO
ignored
MAN
ignored
AUTO
ignored
MAN
ignored
AUTO
ignored
MAN
ignored
AUTO
ignored
MAN
ignored
AUTO
ignored
MAN
ignored
AUTO
ignored
MAN
ignored
ignored
AUTO
ignored
MAN
SWE
:GEN
ignored
ANAL
ANAL
STEP
STEP
ANAL
ANAL
STEP
STEP
ANAL
ANAL
STEP
STEP
ignored
ignored
l
SWEep:GENeration
STEPpedlANALog
l
SWEep:GENeration?
Sets and queries the type of sweep to be generated: an analog sweep
or a digitally stepped sweep. In either case, all of the other sweep
subsystem functions apply. *RST is
ANALog.
S-50
Operating and Programming Reference
HP 8360
User’s Handbook