Filter
Top Products
Auto Fill
#F'ts
Function Group
FREQUENCY, POWER
Menu Map
2,s
Description
This softkey is used in two locations:
Fitness
Menu and
List Menu.
Flatness Menu
-
When selected, the synthesizer waits for a numeric
value representing the number of correction points to be entered.
-->
Number of Correction Points: is displayed in the active entry area.
A list of frequencies containing the number of specified points is
created automatically. The list begins at the auto fill start frequency
and ends at the auto fill stop frequency. The rest of the points are
equally spaced between them. A minimum of two points must be
entered.
If the number of points requested creates a list that exceeds the
number of elements available (801), the following message appears:
TOO MANY CORRECTION PTS
REqUESTED
List Menu
-
When selected, the synthesizer waits for a numeric value
representing the number of list points to be entered.
-->
Number
of List Frequencies: is displayed in the active entry area. A list
of frequencies containing the number of specified points is created
automatically. The list begins at the auto fill start frequency and
ends at the auto fill stop frequency. The rest of the points are equally
spaced between them. A minimum of two points must be entered.
If the number of points requested creates a list that exceeds the
number of points available (801), the following message appears:
Error. . .too many list points requested.
Points used: 0
Points available: 801
Programming Codes
SCPI: NONE, see Fltness
Menu
or List Menu
Analyzer: NONE
See Also
Fitness
Menu,
List Menu
“Optimizing Synthesizer Performance” in Chapter 1.
A-24
Operating and Programming Reference
HP 8360
User’s
Handbook