Filter
Top Products
FM On/Off Int
Function Group
IhnoD]
Menu Map
4
Description
This softkey (Option 002 only) activates the internal frequency
modulation mode. No external source is needed.
When internal FM is in effect, the parameters are controlled by the
following soft keys:
Internal FM Rate Internal FM Deviation
FM Coupling
IOOkHz
FM Coupling DC Waveform Menu. The
synthesizer is factory preset to a 1 MHz rate, 1 MHz deviation, and
sine wave parameters.
An asterisk next to the key label indicates that internal FM is active
and FM is displayed on the message line.
Programming Codes
SCPI:
FM:SOURce
INTernal
FM:STATe
ONIOFF
Analyzer: NONE
See Also
(MOD_),
also see “FM” and “Modulation”.
Freq Cal Menu
Function Group
USER CAL
Menu Map
9
Description
This softkey accesses the sweep span calibration menu.
Swp Span
Cal
Always Performs a sweep span calibration each time
the frequency span is changed.
Swp Span Cal Once
Performs a sweep span calibration.
F-16
Operating and Programming Reference
HP 8360
User’s Handbook